Welcome to Evergreen Steel

Valves:

Check Valves

"Evergreen Steel " makes a reliable high pressure check valve for free flow in one direction only with minimum pressure drop, soft seating arrangement without any force on the soft BUNA "N" or VITON seal results in zero leakage at back pressure & long life, available with screwed & pipe / tube ends.
Cracking pressure: 0.30 to 0.50 kg/cm2 standard special cracking pressure available Test pressure: Body: 620 kg/cm2
Seat : 413 kg/cm2
Pneumatic : Seat 60 kg/cm2
Seal : BUNA "N", VITON
Material:A105,SS304,SS316,Monel,Hastelloy.
Finish: CS zinc plated & dichromated, SS natural.

Gate Valves

Moc: ASTM A216 Gr. WCB
Trims: S.S. 410 / 13 Cr. / 18 Cr. 8 Ni.
Mfg. Std.: API 600
Insp. & Test Std.: API 598
Ends:Flanged to ANSI B 16.5 RF, 150#/300#
Hyd. Test Std. Body: 30 kg/sq.cm / 77 kg/sq.cm
Seat:21 kg/sq.cm / 56 kg/sq.cm

Globe Valves

We offer globe valve, which is used for single direction flow control and is also efficient for throttling services. These valves are designed for least possible obstruction to free flow. Some of the technical specifications are:

Technical Data:
Manufacturing Std. :Generally conforming to BS 5352 End Connection :Screwed Ends to BSP / BSPT/ NPT (F) Socket Weld Ends to ANSI B 16.11 Inspection and Testing Std :BS 6755 (Part – I)

Forged Steel Valves

Type - Screwed, S/W, B/W. & Flanged. Material-CS-105, AS- F11, F12, SS 304, 304L, 316. 316L Gland Packing - Grafoil, Graphite, Asbestos, PTFE. Stem/Spindle - AISI 316/ AISI41 0
Temprature - varies as per packing material ranges from cryogenic upto 5000C
End Connection
1) Screwed to ANSI B2.1 or BS.21 / IS.554
2) Socket weld ends ANSI B16.11 / IS4712
3) Butt weld to ANSI B16.25
4) Flanged according to ANSI- B 16.5 /BS 1560

Details Of Test :-

Test Part :-	Test Pressure :-
Body ( hyd )	211 kg / cm2 i.s. 3000 psi
Seat ( Hyd )	141 kg / cm 2 i.s. 2000 psi
Seat ( air )	5.6 kg / cm 2 i.s. 80 psi

Manifold Valve

"Evergreen Steel" makes 2 valve, 3 valve manifolds are available with remote or separate mounted. Virgin valve process & inst. connections are available with 1/2" NPT (F) threads.
2 valve manifold is for easy block or isolate and use for calibration systems.
3 valve manifold is for 2 isolate & I equalizer valve for equalizing the high pressure & low pressure lines.
5 valve manifold consists of 2 isolate, 2 drain & I equalizer valves.
All valves are available variety of raw material, Stainless of all grades, Monel, Brass, C.S. etc.

Needle Valves

"Evergreen Steel " makes Needle valves are specially design with packing below the threads. This design increases the line of packing & spindle threads.
"Evergreen Steel" pipe fittings design is made as per highest quality standard and meet the requirement of ANSI BI. 20.1 for (NPT) threads.
All fittings end connections are fitted with end caps to prevent thread damages.

Ball Valves

"Evergreen Steel" Ball valves are available in size range from 1/8" to 1" with NPT, BSP, BSPT male/female end connections. These valves are design for application on instrument lines, gas sampling lines, pneumatic systems, pilot plants, analyzer labs etc. These valves perform on/off functions.

Type : 2 way, 3way, 4way, 5way, 1 piece, 2 piece,3 piece, Quarter turn, Half turn, Full turn i.e.'L' port (90 ), 'T' port (full turn)

Available in Stainless Steel of all grades, Monel, Brass, C.S etc.

Website Designed & Developed By